 |
03:36 Minutos
AMV Spirit, Spanish version: Toca ya el clarín
|
 |
01:47 Minutos
Initially intended for the canceled TV Show "El vídeo del millón de euros", now available to the public. Marty and Doc must travel to the future to prevent a time paradox, but a policeman will complicate the mission. Made by Double Impact Productions
|
 |
12 Segundos
enric
|
 |
|
 |
41 Segundos
this is a stop motion movie i made with paint
|
 |
16 Segundos
number 1 in a series this found me using editing techniques that i hadnt engaged in before
|
 |
01:30 Minutos
This is how to make a custom 2 into one exhaust, out of three exhaust tail pipes from the auto (car) store using an Inverter arc welder 2.5mm rods and 80 amps. All these pipes are readily available from the auto store and used to adapt car exhausts. They come in short lengths. Mine came from Cliffords in School lane Hove Sussex UK. You start by getting two auto pipes which fit the Bros headers and you bend them with heat (cherry red) around 10 degrees. I made a jig to keep them the right distance apart, Both tube centres will close up by 3mm when removed from the jig after welding so make the jig 3mm wider. You ten slash cut them with a 1mm cutting disk using a 4 1/2 " grinder. Cut them back at the end they meet to give the same size hole as the second bit you weld on. Find another socketed pipe which fits the slip silencer you want to fit and weld that on, just tack it on to start. Buy a stainless silencer from ebay and cut it down half the length and re pack it. Pop rivit the end cap back on, job done. To read more on how to arc weld for beginners go to my site www.jeeptent.co.uk
|
 |
01:54 Minutos
I know its shit.
|
 |
25 Segundos
Enric mec
|
 |
04:48 Minutos
terrano2 de escapada por can bros miralo hasta el final
|
 |
01:47 Minutos
Video grabado en Castellbisbal el día de la gran quedada en el día de la Mercé (24/09/10), mientras que únicamente estaba yo en la estación por la mañana y pasó esto.
|
